multi-head oil pump

multi-head oil pump is manufactured according to German technology

GeneralThis product is manufactured according to German technology,Its performance of airproof is very good with small bulk and long life,It can be drove by motor directly connect to camshaft.It is 

suitable  for outwork.Linner diameter of sucker from auxiliarytank to gasoline pump must be enough big so that enough oil has been Supplied to gasoline pump to use.

Ensure to use dean oil.

Exhaust air in the gasoilne pump before use.

Adjusting must be rightly done according to method.

Supplying oil can be adjusted from the most to 1/3 of the most.Adjusting screw of multi-head oil ejector determine to amount of supplying oil.If rotate anticlockwise,amount of supplying oil will increase;On the contrary,if rotate clock wise,amount of supplyin oil will reduce.Multi—head oil ejector has been adjusted to full traveI by manufactuer.If you want to reduce amount of supplying oil,firstly you must open plug to adjust,screw rotate one circuit and wring four times,adjusting traveI of one dircuit is 1 mm.The most adjusting scope is 8mm.

performance and technical parameter 

Model	ZJN-10/250	ZJN-10/160
Medium applicable	Mineral
Viscidity	16.5~4000cst
Max.oil supply flux/turning	0.18ml	0.3ml
Importation rotating speed	900~1400 r/min
Transmissionization	148.1
Quantity	2-12
Safety	25MPa	16MPa

multi-head oil pump